亚洲午夜性猛春交xxxx,奇米影视第四色7777,一二区精品

您所在的位置：紡機網 >> 無錫市華莊電機有限公司 >> 紡織專用系列電機

產品推薦

產品分類

友情鏈接

聯系方式

聯系人：華莊電機
郵箱：
地址：無錫華莊小溪橋
電話：0510-85602521 0510-85602529
傳真：0510-85602521

打印

分享到：

紡織專用系列電機

發布時間：2004-04-09

Y132 S₂-2

使用條件：
環境溫度：隨季節而變化，但不超過40℃
海拔：不超過1000米。
頻率：50赫芝
電壓：380伏。
接法：3千瓦及以下為Y接，4千瓦以下為△接。
工作方法：連續S1。
注：
如有特殊要求，請求于訂貨時提出。
如：
1.雙軸伸或特殊軸伸。
2.異電壓（如346、420、440、460伏）等。
異頻率（60赫芝）
3.左出線（面對出軸，接線盒在左側）。
4.不同絕緣等級，如F級。
5.不同防護等級，如IP54、IP55。

Conditions
Ambient temperature: It varies with seasons but not exceeding 40℃
Altitude: Altitude should be lower than 1000 meters above sea level.
Frequency:50 HZ
Rated voltage:380 V
Connection: Star-connection for 3KW and below whereas delta-connection for 4KW and above
Duty: Continuous(S1)
Remarks: When placing orders, please indicate the following special requirements, if any:
1.Double shaft-extension or special shaft-extension.
2.Different voltages such as 346V, 420V,440,460V and different frequency such as 60 HZ.
3.Terminal box to be placed on the left-hand side when facing the drive end.
4.Different insulation class such as class F.
5.Different protection class such as IP54, IP55.

概述：
   Y系列是一般用途的全封閉自扇冷鼠籠型三相異步電動機，它是我國統一設計的最新系列。防護等級為IP44。
   Y系列電機具有高效、節能、起動轉矩大、性能好、噪聲低、振動小、可靠性高、功率等級和安裝尺寸符合IEC標準以及使用維護方便等優點。
   Y系列電機適用于不含易燃、易爆或腐蝕性氣體的一般場所和無特殊要求的機械上，如：金屬切削機床、泵、風機、運輸機械、農業機械、食品機械等。由于電動機有較好的起動性能，因此也適用于某些對起動轉矩有較高要求的機械，壓縮機等。
   Y系列電機的型號由四部分組成；第一部分漢語拼音字母Y表示異步電動機；第二部分數字表示機座中心高（機座不帶底腳時，與機座帶底腳相同；）第三部分英文字母為機座長度代號（S-短機座、M-中機座、L-長機座），字母后的數字為鐵心長度代號；第四部分橫線后的數字為電動機的極數。
General
Y-Series Three-phase induction Motors the brand-new product developed by our country, are defined as totally enclosed, fan cooled, squirrel cage motors for general application. The protection class is IP44.
With high efficiency, energy-saving, high reliability, easy maintenance, the motors are designed to be large in starting torque, low in noise and small in vibration. The rated output and mounting dimensions agree with those recommended by IEC.
The motors find applications in the places where inflammable, explosive and corrosive gases are kept off as well as in the machinery without special requirements such as metal-cutting machine tools, pumps, blowers, transportation machinery, mixers, agricultural machinery and food machinery. Furthermore, the good starting performance makes the motor possible to be used in compressors, etc. which call for strict requirements of starting torque.
The type designation of the motors consists of four parts: Y standards for induction motor; 132 frame size (The frame size of the motor without feet is the same as that of motor with feet.) the third part is the length of frame(S-shrot frame, M-Medium frame, L-long frame) the figure close to it the length of core; the figure after the line the number of poles.